Wirelife® Almasol® Coating Lubricant 2002
Item # 2002-PL — Wirelife® Almasol® Coating Lubricant 2002
Self-Healing Fluid Seals & Protects Surfaces
Wirelife® Almasol® Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust - even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec® Penetrating Lubricant, maximum protection and wear reduction is achieved.
In addition to its primary function as a coating, it also provides moderate penetration - depending on the tightness of tolerances and the temperature when applied. It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a self-healing, nontacky, protecting film that is highly resistant to wash-off from both fresh and salt water.
Wirelife® is a registered trademark of and Almasol® is a registered trademark of Lubrication Engineers, Inc.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
If you cannot find the lubricant or product you need, please let us know what your requirements are by contacting us.
For a more detailed quote, choose similar products and add them to your Quote Cart. You will be able to provide additional project details in Quote Cart Checkout.
Asset Reliability Solutions
Available Container Size
Pail
Asset Reliability Solutions
Beneficial Qualities
Durable Coating
Cautions
Contains a combustible petroleum solvent
GHS Statement
For commercial and professional use only
Proprietary Additive
LE's proprietary additives are used exclusively in LE lubricants. Wirelife Almasol Coating Lubricant contains Almasol.
Almasol® wear- reducing additive attaches itself to metal surfaces in a single microscopic layer, yet will not build on itself or affect clearances. It possesses tremendous load-carrying capacity, is impervious to acid attack and minimizes metal-to-metal contact and the resulting friction and wear. When added to LE lubricants, it provides a level of protection available with no other lubricant.
Typical Applications
Color
Brown
Copper Corrosion 3 hrs @ 100oC (212oF), ASTM D130
1b
Falex Pin & Vee Block EP lbf, ASTM D3233
3,750+ lbf
Pour Point °C (°F) as applied
9 (49)
Four Ball Wear, @ 75oC (167oF), 1,200 rpm, 40 kgf, 60 minutes, mm Wear, ASTM D4172
0.43
Four-Ball EP Load Wear Index kgf, ASTM D2783
56
Four-Ball EP Weld Point kgf, ASTM D2783
400
Humidity Cabinet days, ASTM D17481
60+
Immersion Test (5% salt water), days2
100+
Pour Point °C (°F) as applied
9 (49)
Salt Spray days, ASTM B117
60+
Timken OK Load lbs, ASTM D2782
60
Viscosity-Brookfield @ 25°C (77°F) as applied, cP, ASTM D2983
2,000-5,000
Related Products
Xtract® Oil Sight Glass & Level Monitor (OSGL) (Dual Port)
Xtract® Oil Sight Glass & Level Monitor (OSGL) (Dual Port)
Xtract® Oil Sight Glass & Level Monitor (OSGL) (Dual Port)
Center Bonded Mounts STA Series
Industrial Greases
Engine Oils
Food Grade Lubricants
Aerosol Lubricants
Gear Oils
Reliability Solutions