Wirelife® Monolec® Penetrating Lubricant 2001
Item # 2001-qd — Wirelife® Monolec® Penetrating Lubricant 2001
If you cannot find the lubricant or product you need, please let us know what your requirements are by contacting us.
For a more detailed quote, choose similar products and add them to your Quote Cart. You will be able to provide additional project details in Quote Cart Checkout.
Available Container Size
Quarter Drum
Beneficial Qualities
Superior Penetration
Cautions
Contains a combustible petroleum solvent
GHS Statement
For professional and commercial use only
Performance Requirements Met or Exceeded
USDA H2
Proprietary Additive
LE's proprietary additives are used exclusively in LE lubricants. Wirelife Monolec Penetrating Lubricant contains Monolec.
Monolec® wear-reducing additive has proven its extraordinary performance in thousands of applications. An invaluable component in LE's engine oils, industrial oils and many of its other lubricants, Monolec creates a single molecular lubricating film on metal surfaces, vastly increasing film strength without affecting tolerances. It allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.
Typical Applications
- All stationary or moving wire ropes or cables under heavy loads
- Chains of all sizes
- Mining and construction
- Standing and running lines
- Draglines, cranes and derricks
- Marine environment
- Cranes, hoists and drilling rigs
Color
Purple
Copper Corrosion 3 hrs @ 100oC, ASTM D130
1b
Falex Pin & Vee Block EP lbf, ASTM D3233
3,750+ lbf
Pour Point °C (°F) as applied
-18 (0)
Four Ball Wear, @ 75oC (167oF), 1,200 rpm, 40 kgf, 60 minutes, mm Wear, ASTM D4172
0.59
Four-Ball EP Load Wear Index kgf, ASTM D2783
53.1
Four-Ball EP Weld Point kgf, ASTM D2783
400
Four-Ball Wear @ 75oC (167oF), 1,200 rpm, 15 kgf, 60 minutes, mm wear, ASTM D4172
0.42
Four-Ball Wear @ 75oC (167oF), 1,200 rpm, 15 kgf, 60 minutes, mm wear, ASTM D4172
0.42
Humidity Cabinet days, ASTM D1748
60+
Immersion Test days, 5% saltwater
30+
Pour Point °C (°F) as applied
-18 (0)
Rust Test 4 hrs @ 60oC (140oF), DI H2O, ASTM D665A
Pass
Rust Test 4 hrs @ 60oC (140oF), Sea H2O, ASTM D665B
Pass
Salt Spray hrs, ASTM B117
62 hrs
Timken OK Load lbs, ASTM D2782
60
Viscosity @ 100oC (212oF), cSt, ASTM D445
15.51
Viscosity @ 40oC (104oF) as applied, cSt
44.76
Viscosity @ 40oC (104oF), cSt, ASTM D445
210.7
Copper Corrosion 3 hrs @ 100oC, ASTM D130
1b
Downloads
Popular Product Categories
Industrial Greases
Engine Oils
Food Grade Lubricants
Aerosol Lubricants
Gear Oils
Reliability Solutions
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
